Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Footwear Testing Equipment
no data
The finished shoe bending resistance testing machine (starting from the heel) is used to test the bending resistance of finished shoes and soles. After the shoes and soles are twisted at a certain angle for a certain number of times, the machine is used to observe the damage to the shoes and soles, or to check the location and degree of cracks, in order to improve quality. The number of tests can be set, and the machine will automatically shut down when the set value is reached. In any stationary state, the machine automatically returns to the starting position at a slow speed and stops automatically.
Test principle
Make several holes at the max flexing points, then clamp the two ends with clamps, one end fixed and the other flexible, the round shaft will bump repeatedly so as to bend the soles, after reach a specific times of bending, use magnifier to detect the sole stretch resistant performance.
Make several holes at the max flexing points, then clamp the two ends with clamps, one end fixed and the other flexible, the round shaft will bump repeatedly so as to bend the soles, after reach a specific times of bending, use magnifier to detect the sole stretch resistant performance.
This device is used to test the overall bending resistance of shoes under dry and wet environmental conditions, in order to evaluate the overall bending resistance of shoes.
This machine is suitable for testing the folding endurance of finished shoes and soles at room temperature. Install the finished shoes or soles on the folding test machine, conduct a bending test at a certain angle and frequency, and then measure the crack length of the sole after a certain number of bendings, and observe the shoe upper changes, with power-off memory function.
This test equipment is specially used to test the flexing resistance of rubber or plastic coated fabrics by ISO 7854 method C Crumple flex and BS 3424-9 Method 11D.
This device is used to test finished shoes such as sports shoes, casual shoes, and work shoes. After continuous reciprocating bending for a long time, at a fixed frequency and angle, its bending resistance is evaluated or its degree of cracking is examined.
This tester is suitable to test the fatigue characteristics after continuous bending on rubber, leather, synthetic leather, shoe soles and other materials.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person:
Mr. Patrick.Chuang
info@servereal.com
WhatsApp/wechat: +86-18014755745