Material Test Equipment
Applications
1. Vacuum drying and storage of biochemical reagents, medicines, optical lenses, seeds, precision components, cultural relics and other items
2. Anti-oxidation of inert gas vacuum storage materials
3. Vacuum drying
The vacuum drying process is fast and safe, especially effective for drying volatile liquids.
This equipment is mainly used for sampling the release of harmful substances in decorative materials such as artificial boards and their products, wooden furniture, carpets, carpet liners, and adhesives for carpets.
This equipment is mainly used for sampling the release of harmful substances in decorative materials such as artificial boards and their products, wooden furniture, carpets, carpet liners, and adhesives for carpets.
A light incubator is a widely used laboratory equipment, widely used for the cultivation and preservation of molds, bacteria, and microorganisms, plant cultivation, and breeding experiments.
The FX-TOC1 total organic carbon analyzer is a high-precision total organic carbon analysis instrument, it uses conductivity difference detection technology, features high detection accuracy and short response time.
The Calibration bath includes high-temperature calibration thermostatic bath and high low-temperature calibration thermostatic bath. The internal circulation of the calibration tank adopts jet technology, LCD display, touch screen operation.
The curtain flame retardent tester is mainly used to test the flame retardant performance of hanging fabrics like curtains. It can be applied to single-layer or multi-layer fabric, but cannot be applied to fabric with a weight greater than 700 g/m2 (21 oz/yd2).
The heat radiation performance tester is used to determine the thermal radiation protection performance of protective materials, meeting testing standards such as ISO 6942 and EN 366. This testing instrument includes two testing methods. Method A is used to visually evaluate the appearance changes of the material after thermal radiation, while Method B measures the radiation heat transfer index (RHTI) of the material by measuring the testing time required to increase the back temperature of the sample by 12 degrees or 24 degrees, in order to determine the thermal protection performance of the material.
Test object: Lithium battery cells (size can be customized);
Test indicators: battery temperature, voltage, gas production, gas production rate, starting temperature of thermal runaway, etc.
The cone calorimeter is a material combustion performance testing instrument based on the principle of oxygen consumption. After more than 30 years of continuous improvement and perfection, the cone calorimeter has become one of the most important experimental instruments for studying material combustion performance.
Cone calorimeter testing is a safe, fast, and accurate detection method. In addition to product development, cone calorimeters can also be used as quality control tools.
Test object: refrigerant or combustible gas Test indicators: combustion speed, flame peak area, flame bottom cross-sectional area
The insulation glove flame resistance test device is suitable for testing the flame resistance performance of insulation gloves for live working. Meet GB/T17622-2008 and EN 60903.
The thermal radiation flame propagation tester is developed based on the French building materials and railway vehicle flame retardant testing standard NF P92-501.
The thermal radiation droplet tester is developed according to NF P92-505 and EU 95/28/EC fire retardant testing standard.An upper radiation heat source is applied to the sample for 30KW/m2 thermal radiation, which may cause combustion of released gas, and then observe whether the sample will produce droplets and cause combustion of fiber cotton.
This flame retardant performance tester is suitable for various textile products, medical protective clothing, curtain decorative fabrics, tent fabrics, etc. (specific ignition nozzles and sample racks can be customized to meet various standards).
This equipment is used to detect the content of fluorescent substances in non-woven fabrics.
This equipment is used to test the powder drop performance of sanitary products, especially toilet paper products.
It is a specialized test equipment for determination of the softness of toilet paper, tissue paper, sanitary materials and other materials.
It is used to test the absorption speed of various sanitary napkins, pads, etc.
It is suitable for automatic test of water absorption rate of various sanitary napkins, non-woven fabrics and other water-absorbing materials.
It is used to measure the permeation properties of diapers and diapers, such as the absorption rate, the amount of rewet and the amount of leakage.
It is used to measure the permeation properties of diapers and diapers, such as the absorption rate, the amount of rewet and the amount of leakage.
This is a specialized equipment used for testing the cotton core strength of hygiene diapers.
This equipment is used to determine the slippage, wetback and leakage properties of diapers and diapers/pads for infants and adults.
This equipment is used to test the ability of coverstock material to resist the transport back onto the skin of a liquid that has already penetrated the coverstock.
This tester is used to test the bending stiffness property of fabrics, nonwoven fabrics, artificial leather and other materials by Gurley method.
This equipment is used to determine the liquid (simulated urine) penetration properties of nonwoven coverings.
This equipment is used to determine the liquid (simulated urine) penetration properties of nonwoven coverings.
This run-off tester is used for measuring the quantity of excess liquid that runs from the test nonwoven fabrics.
This equipment is used to determine the liquid absorption properties of nonwovens fabric, including liquid absorption time, liquid absorption amount and liquid wicking height, liquid wicking rate, etc.
This softening point tester is suitable for measuring the drop point and softening point of amorphous polymer compounds to determine their physical and chemical properties such as concentration, polymerization degree, and heat resistance can replace traditional Ubbelohde drop point determination and global softening point determination.
The multi specimen friction and wear tester is a multifunctional friction and wear tester with multiple sample adapters, capable of testing more than 20 different geometric shape specimen samples. It can be widely used to evaluate raw materials, coatings, lubricants, and Pv, and determine their dynamic and static friction coefficients.
This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane sponge foam sample can be tested according to the national standard, and the indentation hardness of sponge, foam and other materials can be accurately measured.
This machine is widely used for torsional mechanical performance testing of various components, dumbbell shaped specimens, composite materials, etc. Suitable for hardware, electrical, metallurgical, automotive, tool manufacturing enterprises, quality supervision, metrology and quality inspection, aerospace, nuclear weapons, construction and building materials, universities and research institutes, and other experimental fields.
Hot Deformation Vicat Softening Point Tester is mainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials. This instrument is easy to operate and has precise control, and is widely used in colleges, research institutions, and product quality supervision and inspection units.
The thickness gauge adopts a mechanical contact measurement method, which strictly meets the standard requirements and effectively ensures the standardization and accuracy of the test. Professional and suitable for precise thickness measurement of various materials.
The positive and negative pressure non-destructive sealing tester is professionally suitable for micro leakage and packaging sealing integrity testing of ampoules, penicillin bottles, injection bottles, freeze-dried powder injection bottles, and pre filled packaging samples.
This machine is mainly used for rough machining of impact, tension, compression, and thermal performance specimens, and is applied to non-metallic materials such as plastics, organic glass, fiberglass, and steel.
The automatic notch making prototype is a standard notch spline used for impact testing of non-metallic materials such as plastics, organic glass, fiberglass, etc., prepared by mechanical processing methods for simply supported beams and cantilever beams.
The ZZY-25 fully automatic dumbbell prototype is used for the preparation of dumbbell shaped specimens specified in standards.
This combustion tester is suitable for testing the flame retardant performance of public place used fabrics, places such as hanging curtains, outdoor fabric etc. It is applied to fabrics with a weight greater than 700 g/m2 (21 oz/yd2). Meets NFPA 701 standard.
The notched prototype is a standard notched spline used for impact testing of non-metallic materials such as plastic and organic glass using mechanical processing methods.
The universal prototype is mainly composed of cutting, milling curve dumbbell shaped, and milling notches which is mainly used for impact notch splines of non-metallic materials such as plastics, organic glass, fiberglass, and carbon fiber, dumbbell shaped specimens for tensile testing, and rectangular specimens for Vicat temperature, thermal deformation temperature, compression, and bending tests.
The touch screen solid density meter builit-in Android operating system, can quickly read the density and volume of various irregular solid particles, and has a digital display for direct reading.
This density meter can measure both the solid or liquid density.
The MDJ-G4 Series adopts German HBM imported sensors, a Free Flip integrated aluminum alloy measuring table with a non lifting cover, a transparent water tank, high accuracy, features easy operation, better humanization, suitable for density testing of various solid materials.
The universal prototype is mainly composed of cutting, milling curve dumbbell shaped, and milling notch.It is used for non-metallic materials such as plastic, organic glass, fiberglass, and carbon fiber to produce impact notched splines, dumbbell shaped splines for tensile testing, and rectangular splines for Vicat, thermal deformation, compression, and bending testing.
This densitometer adopts the principle of U-tube oscillating method, combined with Peltier precise temperature control technology and high-definition video camera technology, not only provides users with accurate, stable and reliable test results, but also brings users with efficient and convenient test feelings. HD video can easily see whether there are bubbles in the sample. Pulse excitation and high-precision detection technology are used to facilitate users to accurately and quickly measure the sample density and density related parameters.
The MIT folding endurance tester is a specialized test equipment used to test the folding fatigue resistance of paper, cardboard.
This paper sample cutter is suitable for cutting the samples required for edge compression strength and bonding strength tests of corrugated cardboard. Fully meets the requirements of QB/T1671 standards and is an ideal auxiliary testing tool for departments such as corrugated cardboard and cardboard box production, scientific research, and quality supervision and inspection.
This compressive strength tester can be used to test the compressive strength of paper tubes, ring compression strength (RCT) of paper, edge compression strength (ECT), flat compression strength (FCT), adhesive strength (PAT) of corrugated cardboard, and flat compression strength (CMT) of paper cores with a diameter less than 60mm.
Description
The YD-35 intelligent tablet hardness tester is a drug testing instrument used to measure the hardness and diameter of tablets. Widely used in pharmaceutical factories, drug testing institutes, and related scientific research units.
Description
YD-20 intelligent tablet hardness ceremony is a drug testing instrument used to measure the hardness and diameter of tablets. Widely used in pharmaceutical factories, drug testing institutes, and related scientific research units.
Description
The YD-2 tablet hardness tester is an instrument used to measure the crushing hardness of tablets, consisting of a control system, pressure sensors, etc. Due to the use of single-chip microcomputer control and efficient low noise motor, the instrument has the characteristics of accurate accuracy, high sensitivity, recording each hardness value, automatically calculating the average value of each batch, good repeatability, simple operation, and high degree of automation in electric extrusion.
This instrument is designed and manufactured according to the industry standard SH/T0308, and is used to measure petroleum products such as fire-resistant fuel, hydraulic oil, turbine oil, or other air release values. It consists of a heat-resistant jacket test tube, a circulating water bath, an air heating bath, gas pressure control, and gas time control parts.
This instrument is used to measure the formation of gum during the evaporation of gasoline, kerosene, and diesel, which records the gum formation caused by the use of fuel oil in engines.
This instrument is designed and manufactured in accordance with the national standard GB/T17623-98 and IEC567:92. It has the characteristics of accurate control accuracy, low noise, and small volume (gas chromatography degassing method). It is an ideal domestic gas chromatography supporting instrument product.
This instrument is designed and manufactured according to the SH/T0168 standard, and is used to determine the color of various lubricating oils and other petroleum products. The measurement method involves injecting the petroleum product sample to be measured into a colorimetric tube, and then comparing it with a standard color plate to determine its chromaticity color number.
Oil Particle Pollution Detection Instrument is a professional instrument used for detecting the distribution, size, and level of pollution particles in oil. This instrument is developed using the principle of light blocking method and is suitable for detecting particle contamination in hydraulic oil, lubricating oil, fire-resistant oil, insulation oil, and turbine oil. We can provide fast, accurate, reliable, and repeatable detection results as well as complete pollution monitoring and analysis reports. Application areas include aviation, aerospace, power, petroleum, chemical industry, transportation, ports, metallurgy, machinery, automobile manufacturing, and other fields.
This instrument is designed and manufactured in accordance with national standards GB/T264 and GB/T7304, and is used to determine the acid value of transformer oil and turbine oil.
Model: SY-2386A
Standards: GB/T2430, ASTM D2386
The jet fuel freezing point analyser is specialized for freezing point temperature at which solid hydrocarbon crystals form in aviation fuel after low-temperature cooling, and then disappear after heating, fully complies to the GB/T2430, ASTM D2386.
This equipment is used to test the degree of physical contamination of insulating oil by water and other suspended substances.
This series of instruments is designed and manufactured in accordance with the national standard GB/T3536, ASTM D92.
This series of instruments is designed and manufactured in accordance with the national standard GB/T261.
The bloom viscosity tester is used to measure the bloom viscosity of Edible gelatin, medicinal gelatin.
System composition: gel strength tester, precision thermostatic water bath, high efficiency refrigerator
The tablet hardness tester is used to determine the drug tablet hardness. Automatic constant rate pressing, precision load cell, LCD display, multi information real time display, Test report output by printer, max value, min value, average value, standard deviation, variation range.
This model tester is a precision dissolution tester, 14 holes 14 paddle 4 column structure, can perform 2 batch test at a same time, one blank test, one standard test. Features easy operation and stable performance.
It’s a high accuracy drug dissolution test equipment, adopts 14 cups 12 paddles structure, with 2 spare liquid cup, can sync do 2 different batch test. Features powerful function, easy operation, stable performance.
The dissolution tester is kind of a most common drug medicine test equipment.
The laboratory of the simulated water spray test box consists of a test bench, a water storage tank, a control box, a product dehydration buffer zone, and a spray system.
This Ozone aging testing chamber is used to test the Ozone aging resistance of vulcanized rubber, thermalplastic rubber, cable insulated jacket, under the condition of static tensile or continuous dynamic stretch deformation, or alternative of them, meanwhile with constant Ozone concentration and temperature. The Ozone aging resistance is evaluated through the clap on the surface or other characteristics variation.
The walk in environmental test chamber can simulate natural environment conditions such as low temperature, high temperature, high temperature humidity, low temperature humidity and other complicated conditions, it’s widely used to test the environmental reliability of construction materials, plastics, electronic products, food, clothes, vehicles, metal, chemicals, composite materials etc., it’s kind of common environmental testing chambers.
The dust test chamber is specially used to perform environmental test thus provide reference for scientific research, products development, and quality inspection, so as to determine the protection degree (IP) of equipments enclosure. It’s kind of common environmental test chamber.
The comprehensive drug photostability test box (with UV monitoring and control) developed by Yiheng has added visible and ultraviolet light monitoring and control on the basis of the original Yiheng GSD \ GSP \ GP comprehensive stability test box. It is an equipment for pharmaceutical and cosmetic enterprises to carry out GMP certification. Meets the light stability testing conditions outlined in the ICH guidelines.
The new generation of drug stability testing equipment integrates years of design and production experience of the company, and introduces and digests German technology. Breaking through the defect of existing domestically produced drug test boxes being unable to operate continuously for a long time is a GMP certified equipment for pharmaceutical factories.
The temperature shock test chamber is used to test the temperature shock resistance of various materials, the temperature shock resistance of material is obtained by the applicability under extremely high and low temperature condition, thus to know the material and products quality. The temperature shock test chamber is kind of very common environmental test chamber.
This instrument uses internationally popular heat flow meters to detect thermal conductivity and thermal resistance, and is equipped with a computer to achieve fully automatic detection and generate experimental reports. Redesigned on the basis of our company's DRPL-I flat plate heat flux meter thermal conductivity tester to adapt to 400 × four hundred × (5-100) Testing requirements for insulation bricks.
This instrument uses internationally popular heat flow meters to detect thermal conductivity and thermal resistance, and is equipped with a computer to achieve fully automatic detection and generate experimental reports. Suitable for testing the thermal conductivity of low thermal conductivity materials such as insulation materials and refractory materials. With the addition of sample frames, it can be used for powder material testing and is widely used in colleges, research institutes, quality inspection, factories and mines.
This instrument mainly tests the thermal resistance of thin thermal conductors, solid electrical insulation materials, thermal conductive silicone grease, resin, rubber, beryllium oxide ceramics, alumina ceramics and other materials, as well as the contact thermal resistance at solid interfaces and the thermal conductivity of materials. The testing material is in solid flake form, and adding a frame can detect powder and paste materials.
This instrument mainly tests the thermal resistance of thin thermal conductors, solid electrical insulation materials, thermal conductive resins, beryllium oxide ceramics, alumina ceramics and other small materials, as well as the contact thermal resistance at solid interfaces and the thermal conductivity of materials. The testing material is in solid flake form, and adding a frame can detect powder and paste materials.
This instrument mainly tests the thermal resistance of thin thermal conductors, solid electrical insulation materials, thermal conductive resins, beryllium oxide ceramics, alumina ceramics and other small materials, as well as the contact thermal resistance at solid interfaces and the thermal conductivity of materials. The testing material is in solid flake form, and adding a frame can detect powder and paste materials.
This instrument mainly tests the thermal conductivity of thin thermal conductors, solid electrical insulation materials, aluminum substrates, thermal conductive silicone, rubber, thermal conductive resins, beryllium oxide ceramics, alumina ceramics, and other materials.
The hot wire method is a dynamic measurement method (non steady state method). The principle is to measure the temperature rise of a linear heat source buried along the length direction of the sample for a certain period of time. Measure the temperature of the hot wire over time by welding a thermocouple at the midpoint. The temperature change of this line is a function of the thermal conductivity of the tested material.
The DRX-3 thermal conductivity tester adopts the transient hot wire method and parallel line method, mainly measuring the thermal conductivity, thermal conductivity (thermal diffusion coefficient), and specific heat capacity of solid and powder materials at different temperatures. Featuring high precision, high resolution, and high reproducibility. Automatically measured by computer control. Widely applicable for measuring the thermal conductivity of materials in research institutions, quality inspection, factories and mines, and other departments.
The DRX-3 thermal conductivity tester uses transient hot wire method, including cross line method and parallel line method, mainly to measure the thermal conductivity, thermal conductivity (thermal diffusion coefficient), and specific heat capacity of solid and powder materials at different temperatures. Featuring high precision, high resolution, and high reproducibility. Automatically measured by computer control. Widely applicable for measuring the thermal conductivity of materials in research institutions, quality inspection, factories and mines, and other departments.
This instrument can measure the thermal conductivity of various metal and non-metallic materials such as ceramics, rubber, glass, insulation materials, refractory materials, aluminum alloys, etc., with a wide testing range.
The thermal conductivity of materials is an important parameter indicator for studying their thermal physical properties. The instrument adopts the principle of thermal protection plate method, which meets the high-precision testing requirements of the material testing and research department for the thermal conductivity of materials.
This instrument is based on the principle of unidirectional stable thermal conductivity. When the upper and lower surfaces of the sample are at different stable temperatures, the heat flux passing through the effective heat transfer area of the sample, as well as the temperature difference and thickness between the two surfaces of the sample, are measured to calculate the thermal conductivity. Satisfied the high-precision testing requirements of the material testing and research department for the thermal conductivity of materials. It mainly tests plastic, glass, fiber, foam, thermal insulation materials, etc. Widely used in material analysis and testing in universities, research institutions, quality inspection departments, and production plants.
The thermal conductivity of materials is an important parameter indicator for studying their thermal physical properties. This series of instruments adopts the principle of thermal protection plate method, which meets the high-precision testing requirements of the material testing and research department for the thermal conductivity of materials. Mainly testing plastic, glass, fiber, concrete, building insulation materials, foam board, powder and other materials. Widely used in universities, research institutions, quality inspection and production enterprises, and other departments.
This instrument is a high-temperature thermal conductivity testing instrument for insulation materials developed based on our factory's DRS-2 water flow flat plate method thermal conductivity tester. Compared with DRS-2, it has improved resolution and automation, shortened testing time, made maintenance easier, and made instrument performance more reliable. This instrument is suitable for testing the thermal conductivity of materials such as refractory insulation, ceramic fibers, felt, textiles, boards, bricks, etc. at different temperatures. Widely used in material analysis and testing in universities, research institutions, quality inspection departments, and production plants.
This equipment is mainly used for sampling the release of harmful substances in decorative materials such as artificial boards and their products, wooden furniture, carpets, carpet liners, and adhesives for carpets.
This equipment is mainly used for sampling the release of harmful substances in decorative materials such as artificial boards and their products, wooden furniture, carpets, carpet liners, and adhesives for carpets.
The curtain flame retardent tester is mainly used to test the flame retardant performance of hanging fabrics like curtains. It can be applied to single-layer or multi-layer fabric, but cannot be applied to fabric with a weight greater than 700 g/m2 (21 oz/yd2).
The heat radiation performance tester is used to determine the thermal radiation protection performance of protective materials, meeting testing standards such as ISO 6942 and EN 366. This testing instrument includes two testing methods. Method A is used to visually evaluate the appearance changes of the material after thermal radiation, while Method B measures the radiation heat transfer index (RHTI) of the material by measuring the testing time required to increase the back temperature of the sample by 12 degrees or 24 degrees, in order to determine the thermal protection performance of the material.
Test object: Lithium battery cells (size can be customized);
Test indicators: battery temperature, voltage, gas production, gas production rate, starting temperature of thermal runaway, etc.
The cone calorimeter is a material combustion performance testing instrument based on the principle of oxygen consumption. After more than 30 years of continuous improvement and perfection, the cone calorimeter has become one of the most important experimental instruments for studying material combustion performance.
Cone calorimeter testing is a safe, fast, and accurate detection method. In addition to product development, cone calorimeters can also be used as quality control tools.
Test object: refrigerant or combustible gas Test indicators: combustion speed, flame peak area, flame bottom cross-sectional area
The insulation glove flame resistance test device is suitable for testing the flame resistance performance of insulation gloves for live working. Meet GB/T17622-2008 and EN 60903.
The thermal radiation flame propagation tester is developed based on the French building materials and railway vehicle flame retardant testing standard NF P92-501.
The thermal radiation droplet tester is developed according to NF P92-505 and EU 95/28/EC fire retardant testing standard.An upper radiation heat source is applied to the sample for 30KW/m2 thermal radiation, which may cause combustion of released gas, and then observe whether the sample will produce droplets and cause combustion of fiber cotton.
This flame retardant performance tester is suitable for various textile products, medical protective clothing, curtain decorative fabrics, tent fabrics, etc. (specific ignition nozzles and sample racks can be customized to meet various standards).
This equipment is used to detect the content of fluorescent substances in non-woven fabrics.
This equipment is used to test the powder drop performance of sanitary products, especially toilet paper products.
It is a specialized test equipment for determination of the softness of toilet paper, tissue paper, sanitary materials and other materials.
It is used to test the absorption speed of various sanitary napkins, pads, etc.
It is suitable for automatic test of water absorption rate of various sanitary napkins, non-woven fabrics and other water-absorbing materials.
It is used to measure the permeation properties of diapers and diapers, such as the absorption rate, the amount of rewet and the amount of leakage.
It is used to measure the permeation properties of diapers and diapers, such as the absorption rate, the amount of rewet and the amount of leakage.
This is a specialized equipment used for testing the cotton core strength of hygiene diapers.
This equipment is used to determine the slippage, wetback and leakage properties of diapers and diapers/pads for infants and adults.
This equipment is used to test the ability of coverstock material to resist the transport back onto the skin of a liquid that has already penetrated the coverstock.
This tester is used to test the bending stiffness property of fabrics, nonwoven fabrics, artificial leather and other materials by Gurley method.
This equipment is used to determine the liquid (simulated urine) penetration properties of nonwoven coverings.
This equipment is used to determine the liquid (simulated urine) penetration properties of nonwoven coverings.
This run-off tester is used for measuring the quantity of excess liquid that runs from the test nonwoven fabrics.
This equipment is used to determine the liquid absorption properties of nonwovens fabric, including liquid absorption time, liquid absorption amount and liquid wicking height, liquid wicking rate, etc.
This softening point tester is suitable for measuring the drop point and softening point of amorphous polymer compounds to determine their physical and chemical properties such as concentration, polymerization degree, and heat resistance can replace traditional Ubbelohde drop point determination and global softening point determination.
The multi specimen friction and wear tester is a multifunctional friction and wear tester with multiple sample adapters, capable of testing more than 20 different geometric shape specimen samples. It can be widely used to evaluate raw materials, coatings, lubricants, and Pv, and determine their dynamic and static friction coefficients.
This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane sponge foam sample can be tested according to the national standard, and the indentation hardness of sponge, foam and other materials can be accurately measured.
This machine is widely used for torsional mechanical performance testing of various components, dumbbell shaped specimens, composite materials, etc. Suitable for hardware, electrical, metallurgical, automotive, tool manufacturing enterprises, quality supervision, metrology and quality inspection, aerospace, nuclear weapons, construction and building materials, universities and research institutes, and other experimental fields.
Hot Deformation Vicat Softening Point Tester is mainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials. This instrument is easy to operate and has precise control, and is widely used in colleges, research institutions, and product quality supervision and inspection units.
The thickness gauge adopts a mechanical contact measurement method, which strictly meets the standard requirements and effectively ensures the standardization and accuracy of the test. Professional and suitable for precise thickness measurement of various materials.
The positive and negative pressure non-destructive sealing tester is professionally suitable for micro leakage and packaging sealing integrity testing of ampoules, penicillin bottles, injection bottles, freeze-dried powder injection bottles, and pre filled packaging samples.
This machine is mainly used for rough machining of impact, tension, compression, and thermal performance specimens, and is applied to non-metallic materials such as plastics, organic glass, fiberglass, and steel.
The automatic notch making prototype is a standard notch spline used for impact testing of non-metallic materials such as plastics, organic glass, fiberglass, etc., prepared by mechanical processing methods for simply supported beams and cantilever beams.
The ZZY-25 fully automatic dumbbell prototype is used for the preparation of dumbbell shaped specimens specified in standards.
This combustion tester is suitable for testing the flame retardant performance of public place used fabrics, places such as hanging curtains, outdoor fabric etc. It is applied to fabrics with a weight greater than 700 g/m2 (21 oz/yd2). Meets NFPA 701 standard.
The notched prototype is a standard notched spline used for impact testing of non-metallic materials such as plastic and organic glass using mechanical processing methods.
The universal prototype is mainly composed of cutting, milling curve dumbbell shaped, and milling notches which is mainly used for impact notch splines of non-metallic materials such as plastics, organic glass, fiberglass, and carbon fiber, dumbbell shaped specimens for tensile testing, and rectangular specimens for Vicat temperature, thermal deformation temperature, compression, and bending tests.
The MIT folding endurance tester is a specialized test equipment used to test the folding fatigue resistance of paper, cardboard.
This paper sample cutter is suitable for cutting the samples required for edge compression strength and bonding strength tests of corrugated cardboard. Fully meets the requirements of QB/T1671 standards and is an ideal auxiliary testing tool for departments such as corrugated cardboard and cardboard box production, scientific research, and quality supervision and inspection.
This compressive strength tester can be used to test the compressive strength of paper tubes, ring compression strength (RCT) of paper, edge compression strength (ECT), flat compression strength (FCT), adhesive strength (PAT) of corrugated cardboard, and flat compression strength (CMT) of paper cores with a diameter less than 60mm.
The laboratory of the simulated water spray test box consists of a test bench, a water storage tank, a control box, a product dehydration buffer zone, and a spray system.
This Ozone aging testing chamber is used to test the Ozone aging resistance of vulcanized rubber, thermalplastic rubber, cable insulated jacket, under the condition of static tensile or continuous dynamic stretch deformation, or alternative of them, meanwhile with constant Ozone concentration and temperature. The Ozone aging resistance is evaluated through the clap on the surface or other characteristics variation.
The walk in environmental test chamber can simulate natural environment conditions such as low temperature, high temperature, high temperature humidity, low temperature humidity and other complicated conditions, it’s widely used to test the environmental reliability of construction materials, plastics, electronic products, food, clothes, vehicles, metal, chemicals, composite materials etc., it’s kind of common environmental testing chambers.
The dust test chamber is specially used to perform environmental test thus provide reference for scientific research, products development, and quality inspection, so as to determine the protection degree (IP) of equipments enclosure. It’s kind of common environmental test chamber.
The comprehensive drug photostability test box (with UV monitoring and control) developed by Yiheng has added visible and ultraviolet light monitoring and control on the basis of the original Yiheng GSD \ GSP \ GP comprehensive stability test box. It is an equipment for pharmaceutical and cosmetic enterprises to carry out GMP certification. Meets the light stability testing conditions outlined in the ICH guidelines.
The new generation of drug stability testing equipment integrates years of design and production experience of the company, and introduces and digests German technology. Breaking through the defect of existing domestically produced drug test boxes being unable to operate continuously for a long time is a GMP certified equipment for pharmaceutical factories.
The temperature shock test chamber is used to test the temperature shock resistance of various materials, the temperature shock resistance of material is obtained by the applicability under extremely high and low temperature condition, thus to know the material and products quality. The temperature shock test chamber is kind of very common environmental test chamber.
This scratch resistance tester is applicable to evaluation of scratch resistance of single coating or composite coating system of coated plate The scratch resistance of the coating shall be evaluated according to whether the spherical steel stylus scratches the coating or the maximum weight of the steel stylus that does not scratch the coating under a certain weight.
The scratch tester is mainly used to evaluate the scratch resistance of paint or coating surface.
It can be used for testing the ductility and damage condition of single coating layer and multi layer coating on base.
This tester is used for impact testing of coatings on metal base.
The T-shaped bending machine meets the requirements of the folding method (folding around the test panel itself) in the standard of GB/T 30791 (the main drafting unit of the standard) and ISO 17132 "Paint and Varnish T-Bend Test". It has the characteristics of compact structure, simple appearance and convenient use. It is an ideal equipment for measuring the bending resistance of colored steel plates and aluminum plates.
It is designed according to the latest standard GB/T 6742-2007 and ISO 1519: 2002 "Type Ⅱ" instrument requirements, used to evaluate the crack resistance and resistance of the coating of paint, varnish or related products when bent around a cylindrical shaft under standard conditions / Or the ability to peel off from metal or plastic substrates.
The instrument is composed of three PVCA rollers arranged side by side and rotates around the pivot, which can effectively prevent the coating from being damaged and shear stress during the test.
The conical mandrel bending tester is used to evaluate the crack resistance of coating of paint, varnish or related products when bent around a tapered shaft under specific conditions. The instrument allows the coating to be stretched under different diameters through a variable cone diameter, and can accurately evaluate the adhesion performance of the coating film.
It's used to test the adhesive and ductility of coatings & paints after bended.
The Buchholz indentation tester is capable for testing the pressure resistance of single or multi layer coatings, but not suitable for high elsatic coatings. The tester is complete with 1pc steel block with 2 supporting point, a round press plate with sharp edge, and a 20× microscope.
Handle operation, more uniform & controllable speed
The pencile hardness tester is used to test the hardness of coatings.
Mainly used to measure the Blue light diffuse reflection(R457), called as blue light whiteness or ISO whiteness
This reflectivity meter is used to determine the occlusion performance of white or light paint,also it’s applicable for comparasion test of coating and paint.
Compact size, portable, high accuracy, suitable for surface gloss of coatings and paintings.
The thickness comb is made of stainless steel, 5 measure range available, max up to 950um.
The automatic applicator guarantees linear & stable movement of applicator, thus guaranteed good repeatability & high quality outcome.
Scrapper and end plate made of thick aluminum, the adjusting gap is 10um.
Suitable for high adhesive water, acid, alkaline product.
This preparation set can accurately coat film, it’s suitable to co-work with the linear dry time recorder, each film applicator can apply two thickness.
This tester is used to test the minimum film formation temperature of the resin glue emulsion, it means format uniform crack-free film under gradient heat drying condition. The main structure is a metal gradient board, there is cooling and heating source at the ends of board, thus will generate a temperature gradient on the metal board, coat a continuous wet film with uniform thickness on the gradient board, dry air flow to dry the sample, meanwhile the water in sample will be evaporated thus will form film, as temperature on board is different thus will result in different film formation position, find the junction point of continuous transparent film and white opaque film, the junction point temperature can be obtained on the screen, this is so called the minimum film formation temperature.
Six paddles with hemispherical contacts mounted on a carriage.
The stroke bar is driven by the carriage and comes into contact with the new coating layer. It starts from one end and moves longitudinally on the sample. The moving time can be measured by a scale on the edge of the instrument, corresponding to each drying stage of the observation trajectory. The coating was pre-coated on a glass strip having a width of 23 mm and a length of 340 mm, and was applied using a square preparation device.
The Storemer type viscometer is used to measure the viscosity of coatings and paintings, only need to press the handle can start test, can test KU and g value, can lock the test result; built in overload protection program, automatic stop when over-range, equipped with print interface, can output test data to computer.
It’s used for viscosity measurement of coatings and paints, the paddles are driven by the loads.
The Ford cups are made in accordance with ASTM D1200, D333, D365 standards, it’s used to measure the viscosity of inks, coatings and paints. It is made of high-quality aluminum cup with a small hole at the bottom and a capacity of about 100ml. The Ford cup evaluates the viscosity of the material by measuring the time required for a certain volume of sample in the aluminum cup to flow out of the small hole at the bottom, and is widely used in the Americas and European countries.
The Zanh cup can be used for quick viscosity determination at site, each cup with a 30cm length ring handle, a ring at the center of handle can keep the the cup always in vertical when testing. Cup body made of SUS material, cup volume 43ml-49ml.
The Iwata cup is used for quick viscosity determination of paint products at site, made as per the JIS standard.
It's used to test the adhesive and ductility of coatings & paints after bended.
The QFM Paint film scriber Is Used to evenly draw a certain size square, and evaluate the degree of adhesion of the coating to the substrate by evaluating the completeness of the coating within the square, expressed as' grade '. It is mainly used for measuring the adhesion of organic coatings by the grid method. This instrument is mainly suitable for measuring the adhesion of organic coatings by the grid method. Not only suitable for laboratories, but also for construction sites under various conditions.
This digital pull off adhesion tester can be used to test the adhesive strength of the coatings on different substrates, the strength is indicated in Mpa or psi, hydraulic loading, manual operation, digital display, test data can be exported out with a USB port.
The adhesion tester is designed and manufactured in accordance with the provisions of the national standard GB/T 4851-2014, and is applicable to the adhesion test of pressure-sensitive adhesive tapes, medical patches, self-adhesive labels, protective films and other products.
This gas permeability tester is specialized to test the gas transmission rate (GTR), and permeability of plastic films, composite films, high barrier materials, sheets and metal foils, by using the pressure-differential method, the test temperature is adjustable.
This water vapor transmittance tester is applicable to the measurement of water vapor transmittance of plastic film, composite film, sheet materials, building materials and other high barrier materials. Based on the principle of infrared method, features high efficiency and wide test range.
The Headspace gas analyzer features portable design, equipped with imported sensors, can accurately and conveniently determine the O2 content in sealed packaging bags, bottles, cans and other hollow packaging containers; CO2 content and N2 content can be tested with optional sensors.
It is suitable for the determination of the dynamic and static friction coefficients of various metal and non-metal materials, as well as the peel strength determination of adhesive composite products, medical patches, release paper, protective films and other products.
This water vapor transmission rate tester is suitable for measuring the water vapor transmission rate of plastic films, composite films and other films, sheet materials, and medical and building materials. The test is based on the cup method.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person: Mr. Patrick.Chuang
Phone: +86-18014755745
WhatsApp/wechat: +86-18014755745
