Packaging Test Equipment
This softening point tester is suitable for measuring the drop point and softening point of amorphous polymer compounds to determine their physical and chemical properties such as concentration, polymerization degree, and heat resistance can replace traditional Ubbelohde drop point determination and global softening point determination.
This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane sponge foam sample can be tested according to the national standard, and the indentation hardness of sponge, foam and other materials can be accurately measured.
The thickness gauge adopts a mechanical contact measurement method, which strictly meets the standard requirements and effectively ensures the standardization and accuracy of the test. Professional and suitable for precise thickness measurement of various materials.
The positive and negative pressure non-destructive sealing tester is professionally suitable for micro leakage and packaging sealing integrity testing of ampoules, penicillin bottles, injection bottles, freeze-dried powder injection bottles, and pre filled packaging samples.
The automatic notch making prototype is a standard notch spline used for impact testing of non-metallic materials such as plastics, organic glass, fiberglass, etc., prepared by mechanical processing methods for simply supported beams and cantilever beams.
The ZZY-25 fully automatic dumbbell prototype is used for the preparation of dumbbell shaped specimens specified in standards.
The adhesion tester is designed and manufactured in accordance with the provisions of the national standard GB/T 4851-2014, and is applicable to the adhesion test of pressure-sensitive adhesive tapes, medical patches, self-adhesive labels, protective films and other products.
This gas permeability tester is specialized to test the gas transmission rate (GTR), and permeability of plastic films, composite films, high barrier materials, sheets and metal foils, by using the pressure-differential method, the test temperature is adjustable.
This water vapor transmittance tester is applicable to the measurement of water vapor transmittance of plastic film, composite film, sheet materials, building materials and other high barrier materials. Based on the principle of infrared method, features high efficiency and wide test range.
The Headspace gas analyzer features portable design, equipped with imported sensors, can accurately and conveniently determine the O2 content in sealed packaging bags, bottles, cans and other hollow packaging containers; CO2 content and N2 content can be tested with optional sensors.
It is suitable for the determination of the dynamic and static friction coefficients of various metal and non-metal materials, as well as the peel strength determination of adhesive composite products, medical patches, release paper, protective films and other products.
This water vapor transmission rate tester is suitable for measuring the water vapor transmission rate of plastic films, composite films and other films, sheet materials, and medical and building materials. The test is based on the cup method.
This tester is suitable for the thickness measurement of bottom and wall of glass bottle.
The automatic torque tester is suitable for testing the torque value of the caps of packaging
products such as bottles, beverage bottles, mineral water bottles, and milk bottles. It is an ideal
instrument either for offline or online testing of production units in the packaging industry.
The bottle cap torque tester is used to test the open and locking force of the caps of bottle, spout bags,
flexible tube, screws, vacuum flask.
This tester can be used for pressure with-stand test of kinds of liquid packing bags.
This drop ball impact tester is suitable for testing of plastic films with thickness less than 2mm.
This drop ball tester is used to test the impact resistance of the auto parts, it meets the PV 3905 and PV 3966 standards of Volkswagen Group. It’s suitable for testing of panels, linings, decorative pillars, anti-friction boards, composite hard sheets, plastic sheets, and films which are widely used in automobile industry.
This equipment is used for impact strength test of plastic films, sheet, composite film, metal foils.
The migration pool is suitable for pretreatment of migration test of food contact materials and products in contact with water, vegetable oil and other nonvolatile food simulants. High quality stainless steel is used, and the material itself has no trace matter precipitation
The thickened screw rod center compression type sealing structure is adopted to ensure that the single side seal is impermeable
Super large one-sided contact area and volume improve the pretreatment efficiency
The sealing structure of the migration test cell ensures that the part beyond the test area of the sample does not contact the food simulant, and ensures the effectiveness of the test area. Suitable for elastic food contact materials and products
The migration test cell is used for pre-treatment of migration test of food contact material and products in contact with water, vegetable oil and other non-volatile food simulants
This tester is used to test the heat shrinkage properties of various kinds of film, heat shrinkage tube, Pharmaceutical PVC tablet, Medicinal backplane.
This machine is used to test the fatigue durability of kinds of shopping bags, test modes available with test times, test duration, bag loading for option. micro printer can print test result.
This bottle tester can be used to test the top compressive strength, flat compressive strength, lateral compressive strength, and deformation of PET or metal containers.
This equipment is a specialized equipment used to test the vertical loading strength of glass containers
The automatic torque tester is specially used for testing the torque value of the caps of packaging
products such as bottles, beverage bottles, mineral water bottles, and milk bottles.
the Drop dart impact tester is a specialized equipment for impact strength testing of Plastic film, sheet, composite film, aluminum foil, Aluminum-plastic composite film, paper, paper board.
This equipment is used for impact strength test of plastic films, sheet, composite film, metal foils, it's designed & made according to the ASTM D3420 NF T54-116 standards.
This test equipment can be used to test the top compressive strength, flat compressive strength, lateral compressive strength, and deformation of PET or metal bottles.
This equipment is used to test the compressive strength of cartons such as corrugated box, honeycomb board box.
This equipment is mainly used to test the sealing quality and bursting strength of soft packagings by positive pressure method, fully meets the ASTM F1140 ASTM F2054 ISO 11607-1 ISO 11607-2 standards.
The oxygen transmissivity tester is designed and manufactured according to ASTM D3985 standard using coulomb oxygen sensor and ISOBARIC test principle. It is applicable to high and medium oxygen and air barrier materials to test their oxygen transmissivity.
This air permeability tester can test the breathability of paper, cardboard, mica tape, cigarette paper, or other sheet-like objects. It meets the requirements of various methods such as Shaw, Bentson, and Gurley, and is widely used in the papermaking, packaging, and cigarette industries, with instrument performance meeting international standards.
This air permeability tester adopts Gurley method to test the air permeability of various types of materials, such as battery diaphragm, air permeability membrane and related polymer materials, as well as cigarette paper and various papers.
This drop ball tester is used to test the impact resistance of the auto parts, it meets the PV 3905 and PV 3966 standards of Volkswagen Group. It's suitable for testing of panels, linings, decorative pillars, anti-friction boards, composite hard sheets, plastic sheets, and films which are widely used in automobile industry.
The rotary sample divider is suitable for all loose powder particles and milky flowing samples that can be lifted off. Such as medicinal powder, flour, laundry detergent, metal powder, fertilizer, sand, feed, seeds, chemical particles, cement, and so on.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person: Mr. Patrick.Chuang
Phone: +86-18014755745
WhatsApp/wechat: +86-18014755745
