The CHT1653 series electrode short circuit tester is designed by our company to effectively detect defective products in the lead-acid battery industry during production due to quality issues or production process issues with the electrode itself. This instrument uses high-voltage pulses to test the battery plates. Due to the small average energy, the damage to the battery is much less than that of the constant voltage measurement method, and it will not be affected by the environment and cause misjudgment. CHT1653B and CHT1653B-6 are models of supporting automatic testing systems, with standard PLC interfaces applied to the automatic sorting system to complete fully automatic assembly line testing. The instrument has self check and alarm point digital preset functions, which can determine the minimum short circuit condition of PE electrode plates with internal resistance greater than 50 Ω. At present, the market share of remote control is ahead of other brands, and it is recognized as

The CHT99xx series programmable safety gauge tester includes CHT9910/CHT9912/CHT9922; Equipped with AC/DC voltage withstand test and insulation resistance test functions; It has 6 sets of testing modes and can achieve programmable testing. The AC and DC voltage output is 0.01kV~5kV/6kV, with an insulation resistance test range of 100k Ω~99G Ω. It also has arc detection and overvoltage detection functions. Optional RS485 interface allows for easy networking of experimental instruments through MODBUS communication protocol.

Introduction 1. The HP8XXX series DC electronic load is a high-precision, programmable DC electronic load controlled by high-performance microprocessors 2. Adopt a 3.5-inch TFT true color LCD display with Chinese and English menus 3. With 4 basic working modes (CC/CV/CR/CW) and 10 functional modes 4. Equipped with comprehensive protection functions, including overheating protection, overcurrent protection, overvoltage protection, overvoltage protection, and loop oscillation protection Built in rich interfaces, including RS232, LAN, USB, and analog interfaces, for remote control and data collection and analysis

The channel scanning module is a specialized built-in scanning module developed by Hepu Electronics in combination with the market's mass production and large-scale testing needs to complete multi-channel switching testing with our company's DC resistance tester, battery tester, and insulation resistance tester. The K series is a built-in scanning card, and the B series is an external scanning box, which is efficient and reliable, and is very suitable for automatic testing matching use. Hepu Electronics provides standard upper computer software to complete data collection for all channels.

CHT3554/ HP3554 battery tester adopts heavy current and strong anti-interference design, which can provide fast, complete, accurate internal resistance and voltage diagnosis for lead-acid batteries of the backup UPS system. No need to stop the operation of the device, we can measure online and quickly diagnose the deterioration of batteries to improve testing efficiency. The self-automatic data saving function can easily store testing data. The storage data capacity can reach 2,400 sets and can be upgraded to 4,800 sets.

HP3540 general DC resistance tester, the test range of 0.001MΩ ~ 31.000kΩ, the basic accuracy of 0.1%, combined with more economical cost performance, to measure various high, medium and low-value resistors; various switches and plug-in plugins Contact resistance, relay contact resistance, transformers, inductors and other winding resistances. Its temperature compensation function is widely used in fields such as coil DC resistance testing, and the meter resistance testing of cable copper rods.

The HP3530/HP3530A is an insulation resistance tester controlled by a high-performance processor that can be used in various electrical, electronic components, and electronic devices within different ranges; Seven range testing, the output voltage can be arbitrarily set at a resolution of 1V from 0 to 1000V, and a resistance of 500 Ω to 9.9P Ω can be tested, with a maximum display of 99999 digits.