Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Material Test Equipment
no data
This machine is suitable for all types of shoelaces and eyelets. A section of the shoelace is passed through the eyelet held by a fiberboard, forming a 90 ° angle between the shoelace and the eyelet, and a 45 ° angle between the fiberboard and the shoelace. Then, the shoelace is tightened under standard tension and repeatedly pulled back and forth through the eyelet. When the shoelace is damaged, the test is stopped.
This machine simulates the anti slip performance of a person while walking. The test personnel wear test shoes and stand on a platform that can change the tilt angle, and add flowing media to the platform. By measuring the tilt angle of the platform and the type of media when the test personnel slip, the anti slip performance of the shoes can be determined.
This chamber can be used to perform Hydrolysis resistance test of leather, shoe materials, as well as the frosting test of rubbers.
This machine is suitable for testing the heat insulation performance test of the upper, lining and inner cushion of various materials, and is used to evaluate the suitability of the test piece for the end use.
This device is suitable for frequent or long-term testing and is equipped with an electronic preset counter (capable of counting 9999 frictions). Equipped with standard weights (9N) friction arms, it meets various standards including ATCC 8 and TCC 165, as well as traditional sample racks. The novelty of the design lies in the optional lightweight friction arm, which can easily add weights for more testing.
This machine is used to perform surface friction tests on shoe upper materials, leather, plastics and textiles. It can perform five test method, including dry, wet, sweat, alcohol, and organic solution. It can be rubbed against the sample by the rotating wool blanket. Then refer to the standard gray card for colorfastness evaluation.
This instrument is a monolithic instrument. Dry or wet wool felt is placed in a groove on the surface of the friction hammer, and a specified weight is placed above the friction hammer. It moves back and forth at a specified speed for a certain distance to rub the surface of the sample. After the movement reaches the specified number of times, the damage and degree of discoloration on the surface of the sample are observed. This instrument is suitable for materials such as leather, textiles, straps, trademarks, cardboard, etc.
Measure the rotational values of the sole test piece and the standard rubber test piece under the same testing conditions on the NBS wear tester when worn with a thickness of 2.5mm. The ratio of the rotational value of the sole test piece to the rotational value of the standard rubber test piece is the wear resistance index of the sole test piece. The wear resistance performance of the tested sole rubber is evaluated based on the magnitude of the wear resistance index value.
This testing equipment is used for the heat resistance test of polymer materials (rubber, plastic, leather, etc.), electrical insulation materials, and insulation components. It can also be used as a high-precision constant temperature drying oven for drying, baking, heat treatment, etc. of items, but is not suitable for the drying and testing of flammable, volatile, or flammable and explosive substances. It is a commonly used testing equipment for industrial and mining enterprises, research institutions, colleges, laboratories, and other departments.
This testing machine is used to test the anti slip performance of shoes. By testing the friction coefficients of various parts of the sample shoe sole, the anti slip performance is determined.
The James machine is specifically designed to measure the static friction coefficient of polished coated floor surfaces, and this testing method is the only one applicable to testing the compliance of the static friction coefficient of floor polishing agents.
This instrument calculates the maximum static slip resistance coefficient of the sample by testing the required tension required to pull a test piece with a certain specification and a certain load, in order to determine the slip resistance performance of the sole material. This instrument can test the finished shoe, the entire sole, and the test piece, and can only test dry type, not wet type.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person:
Mr. Patrick.Chuang
info@servereal.com
WhatsApp/wechat: +86-18014755745