Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Paint Test Equipment
The Iwata cup is used for quick viscosity determination of paint products at site, made as per the JIS standard.
It's used to test the adhesive and ductility of coatings & paints after bended.
The QFM Paint film scriber Is Used to evenly draw a certain size square, and evaluate the degree of adhesion of the coating to the substrate by evaluating the completeness of the coating within the square, expressed as' grade '. It is mainly used for measuring the adhesion of organic coatings by the grid method. This instrument is mainly suitable for measuring the adhesion of organic coatings by the grid method. Not only suitable for laboratories, but also for construction sites under various conditions.
This digital pull off adhesion tester can be used to test the adhesive strength of the coatings on different substrates, the strength is indicated in Mpa or psi, hydraulic loading, manual operation, digital display, test data can be exported out with a USB port.
BGD 528 Multifunction Abrasion Scrub Tester is a powerful abrasion tester. By changing different abrasion heads, it can conform all testing standards for linear reciprocating abrasion, including wet abrasion scrub, sponge washability, scrub resistance, cleanability, dirt pickup resistance, MEK test, Rub test etc.
Moreover, this machine use touch screen to operate, user can set all required test parameters directly through touch screen, and also can check its working status at any time. Very easy and convenient to operate it.
Moreover, this machine use touch screen to operate, user can set all required test parameters directly through touch screen, and also can check its working status at any time. Very easy and convenient to operate it.
The QBY-II pendulum type paint film hardness tester is a modification of the QBY pendulum type hardness tester. Its main characteristics are manifested in the improvement of horizontal mechanisms; The scale can move horizontally for easy zero adjustment; In addition, equipped with a photoelectric counter, it is fast, accurate, and labor-saving.
The design basis followed by this instrument is still GB/T1730-2007. Therefore, it is suitable for sampling tests of paints, varnishes, and related products to determine the film hardness of paints, varnishes, and related products.
The design basis followed by this instrument is still GB/T1730-2007. Therefore, it is suitable for sampling tests of paints, varnishes, and related products to determine the film hardness of paints, varnishes, and related products.
The coating washability tester is an instrument used to evaluate the washability performance of coatings. When in use, it can also evaluate any surface treated with thin film composite treatment. The performance of surfaces such as paint, electroplating, base plate, cover layer, wood density, etc. is determined by the device. The device washes the coating on the coating and standard test plate, and the number of washes can be directly read by the counter. The importance and necessity of testing the washability of coatings can be evaluated based on the number of washability tests.
The QCJ-II paint film impactor is designed and manufactured in accordance with the GB/T1732-2020 standard and similar foreign products. It uses the weight of a heavy hammer to test the degree of damage to the paint film through the impact force generated by a free fall at different heights. Its characteristics are simple structure, convenient operation, safety and reliability, and easy to conduct experiments in the laboratory and construction site.
It is a portable glossmeter that integrates three angles of 20 ° 60 ° 85 °. It is mainly used to measure the surface glossiness value of flat products such as coatings, paints, inks, plastics, ceramics, stones, paper, metals, etc. It is particularly convenient for outdoor operations and power free areas.
This instrument is mainly used to measure the thickness of the wet film on the painted surface and can roughly estimate the approximate thickness of the film when it dries. It can be used both in the laboratory and in production control
This Stone Chip Resistance tester Gravelometer MTG is a specialized equipment used to perform below tests: external coating cohesiveness broken test, interlayer adhesiveness broken test, hardened glass brittleness thickness, anti-strip optimal coating thickness, anti-strip of plastic and glass, collision-resistant, abrasion resistance.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person:
Mr. Patrick.Chuang
info@servereal.com
WhatsApp/wechat: +86-18014755745