Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Somerville pulp screen machine
Standard:TAPPI T 275, TAPPI UM 242
Operational principle
Uses a vibrating vacuum suction to screen the fibers of the pulp after it has been beaten. Uses a speed reducer to drive the cam through a connecting shaft, which vibrates the bottom plate up and down, causing high-frequency vibration of the pulp. Qualified pulp passes through the screen gap, while unqualified fibers and slag remain on the screen plate.
Features
Low vibration, low noise, and small machine size
The sieve plate is easy to replace and easy to operate
Different frequencies can be adjusted according to the slurry to achieve the best results, providing the most reliable experimental data for production
Can be equipped with sieve plates with different gaps, and the machine can also be used as a flat sieve.
Small volume, adjustable vibration frequency, simple disassembly of the sieve plate, convenient operation.
Specifications
|
Screen frame size |
320mm*270mm |
|
Screen gap selection |
0.10/0.15/0.20/0.25/0.30mm Select according to the type of fiber (standard 0.25mm) |
|
Vacuum chamber amplitude |
3.6mm |
|
Sieve gap |
L45*W0.15mm（Standard） |
|
Number of screen gaps |
756 |
|
Weir flow plate height |
180mm |
|
Hydraulic shear height |
2~100mm freely adjusted |
|
Sieve plate replacement |
The sieve plate can be replaced at any time, which takes about 2 minutes to replace |
|
Vibration frequency of slurry |
100~1000 rpm infinitely adjustable, standard screening speed 690~700rpm, manual adjustment, digital display |
|
Control system |
Equipped with timing control system |
|
Compliant with standards |
TAPPI275,UM242。 |
|
Water source requirements |
Water flow rate 8.6 L/min; Water pressure of 18psi (1.23 Kg/cm2) Actual 0~0.2Mpa adjustable (0~14L/min adjustable), depending on actual water pressure |
|
Water level constraint |
Level 3 water level limit label IMT-SJ01 flat screen slurry machine |
|
Power supply |
380V/50Hz |