Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Conical Mandrel Bend Tester
Model: TY-01
Standards:GB/T 11185, ISO 6860
Operation Steps
Carefully cover the surface of the paint film with paper, clamp it between the conical shaft and the operating rod, and clamp the fixed plate.
Use the manual lever to bend the test plate along the conical axis
Bend the sample 180 degrees with uniform force within 15 seconds
Remove the paper and check where the paint film is cracked
Record the location of the crack and measure the distance from the crack to the smallest side of the bending shaft diameter
The extension value of the paint film can be judged in the calibration curve
Specifications
|
Cone dia. |
3.1-38mm |
|
Platen size |
200mm |
|
Overall size |
300×120×340mm |
|
Net weight |
10kg |