Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Material Test Equipment
no data
This test machine is suit for dynamic water-proof characters,fixed the shoes on the special metal shoe tree then immerse the water to flexing it.
This equipment is used to test the anti-permeability properties of various shoe upper materials, such as leather, artificial leather, cloth, etc.
This machine is used to test the hardness of various shoes and uppers. The hardness of the test piece can be obtained by measuring the force value on the test piece through the reciprocating movement of the cylinder.
This machine is used sample preparation for measuring the pH value and hexavalent chromium content of leather.
Test oil tank is specially used to test oil resistance and the length change rate under oil heating of PE, PV plastics.
This device is used to test the bending resistance of midsole fiberboard for leather shoes, casual shoes, travel shoes, and other shoes. During the test, the specimen was continuously bent back and forth to the left and right by 90 degrees until it broke. The bending resistance index of the middle bottom plate was determined based on the number of times it broke.
This machine is mainly used to test the bending resistance of steel hooks. The hooks are inserted into the fixture and rotated 180 degrees around a central column with a diameter of less than 10mm; Visually inspect the surface for small cracks and determine if they are broken, and determine their quality.
This instrument can measure the bending resistance of shoe soles. After the shoes and soles are twisted at a certain angle for a certain number of times through this machine, the damage to the shoes and soles can be observed, or the cracking area and degree can be checked to improve quality.
The leather folding resistance tester is mainly used to test the room temperature folding resistance of finished shoes and soles (pieces), and is an instrument for testing the folding resistance and resistance of leather materials.
The finished shoe bending resistance testing machine (starting from the heel) is used to test the bending resistance of finished shoes and soles. After the shoes and soles are twisted at a certain angle for a certain number of times, the machine is used to observe the damage to the shoes and soles, or to check the location and degree of cracks, in order to improve quality. The number of tests can be set, and the machine will automatically shut down when the set value is reached. In any stationary state, the machine automatically returns to the starting position at a slow speed and stops automatically.
Test principle
Make several holes at the max flexing points, then clamp the two ends with clamps, one end fixed and the other flexible, the round shaft will bump repeatedly so as to bend the soles, after reach a specific times of bending, use magnifier to detect the sole stretch resistant performance.
Make several holes at the max flexing points, then clamp the two ends with clamps, one end fixed and the other flexible, the round shaft will bump repeatedly so as to bend the soles, after reach a specific times of bending, use magnifier to detect the sole stretch resistant performance.
This device is used to test the overall bending resistance of shoes under dry and wet environmental conditions, in order to evaluate the overall bending resistance of shoes.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person:
Mr. Patrick.Chuang
info@servereal.com
WhatsApp/wechat: +86-18014755745