Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.

RSQ06-II Ceramic Tile Thermal Shock Resistance Tester

It is a testing equipment suitable for the thermal shock resistance of ceramic tiles. It has functions such as automatic temperature and time control, automatic test cycle control, and timing. This equipment is reliable in operation, simple in operation, accurate in data, and has two functions: manual and automatic.

Standards:GB/T3810.9-2016 "Determination of Thermal Shock Resistance of Ceramic Tiles" and ISO10545-9:2013 "Determination of Thermal Shock Resistance of Ceramic Tiles" for testing equipment, as well as the requirements of GB/T3298-2008 Method for Measuring Thermal Shock Resistance of Household Ceramics.

Inquiry

Write a Review

Main technical parameters

1. Power supply voltage: AC380V 50Hz; Power: 7.5kW

2. Maximum temperature of the oven: 300 º C ± 5 º C;

3. Temperature control accuracy: ± 5 ℃ (at 300 ℃);

4. Effective volume (basket size): 300 × three hundred × 300mm or 600 × three hundred × 600mm (two sizes optional);

5. Temperature control range of water tank: 15-50 ℃;

6. Test cycle automatic control, automatic material transfer,

7. Number of automatic cycles: 10.

Instrument configuration: including one thermal shock tester host and one sample holder.

For ceramics with a water absorption rate greater than 10%, non immersion testing requires the selection of aluminum plates and aluminum particles, and the cost will be calculated separately.