Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Scratch Resistance Tester
Standards: GB9278-88,GB/T 11982-2005, ISO1518,BS3900,ASTM D5178,ASTM D2197,EN433,EN60335-2-89: 2002
Features
1. The parameter setting is digital. The parameters can be set through the text display, and there is no need to configure special mechanical personnel for mechanical adjustment. The operation is simple and convenient.
2. The human-computer interface adopts LCD text display and Chinese guided interface, which is convenient for human-computer dialogue and has strong standard adaptability. When the standard parameters change, it is only necessary to set parameters without changing mechanical parts.
3. It is driven by steel frame and stepping motor, with stable speed and no impact.
4. The weights and scribe pins can be easily replaced. Even if the standard parameters are modified and different national standards have different weights and scribe pin parameters, only the scribe pins and weights can be replaced.
5. The Y and Z axes are driven by stepping motors. The Z axis stylus can adjust the tilt angle according to different test requirements (adjustment range: 45-90 degrees); The test parameters such as scratch speed, scratch length, scratch spacing and number of scribes are set on the display, which is a test equipment with strong applicability and convenience.
Specifications
|
Diameter of steel stylus |
0.5 ± 0.02mm, 0.7 ± 0.02mm, 1.0 ± 0.02mm, 2.0 ± 0.02mm |
|
Weight |
10N ± 0.5N, 20N ± 0.5N, 30N ± 0.5N, 40N ± 0.5N |
|
Scratch travel |
0-200mm (settable) |
|
Number of scratches |
1-200 (settable) |
|
Moving speed |
1-20mm/s (settable) |
|
Scratch spacing |
0-10mm (settable) |
|
Z axis tilt angle |
45-90 degrees (adjustable) |
|
Sample placement table size |
(W) 270mm X (L) 220mm |
|
Control mode |
PLC programmable controller+LCD text display (or color touch screen) |
|
Drive mode |
stepping motor+synchronous belt |
|
Stylus lifting mode |
Electric |
|
Power supply |
AC220V/50Hz |