Advanced melt flow index tester ISO1133

Features

1. 7-inch color touch screen for input, with a good human-machine interface and sensitive touch control, it is easy to operate and easy to use for testing personnel who first come into contact with such instruments.

2. The 5000 line pulse encoder measures deformation with low resistance, high sensitivity, and fast response.

3. A complete set of eight specifications of weights meets the load requirements of different material tests, with mechanical loading methods and reliable data.

4. Independent furnace body, filled with asbestos inside, with a hollow design between the outside and the box, reducing heat transfer, energy consumption, and preventing burns.

5. The overall covered heating sleeve ensures uniform heating and minimal temperature fluctuations.

6. Hard alloy high-temperature resistant material barrel, corrosion-resistant, high-temperature deformation free.

7. The brass thermal conductivity rod has high thermal conductivity, short heating and temperature recovery time, and high experimental efficiency.

8. The scraping tool is made of 65Mn material, which is durable and does not deform after long-term use. The scraping is thorough and has no residue.

Technical specifications

1. Temperature control range: room~450 ℃

2. Discharge port diameter: Φ 2.095 ± 0.005 mm

3. Outlet length: 8.000 ± 0.025 mm

4. Loading cylinder diameter: Φ 9.550 ± 0.007 mm

5. Loading cylinder length: 152 ± 0.1 mm

6. Piston rod head diameter: 9.474 ± 0.007 mm

7. Length of piston rod head: 6.350 ± 0.100 mm

8. Constant temperature accuracy: ± 0.2 ℃

9. Temperature recovery time: ≤ 4 minutes

10. Timing range: 0.001s-999.999s

11. Measurement range:

Quality method (0.1-2500g)/10min

Volume method (0.01-5000) cm ³/ 10min

12. Input method: touch screen

13. Printing test reports: supported

14. Scraping method: automatic

15. Test methods: Mass method (MFR), Volume method (MVR)

16. Instrument dimensions: 550mm × 350mm × 620mm (length × wide × High)

17. Standard test load: eight specifications

Standard Configuration List