Material Testing Equipments Manufacturers & Suppliers

Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.

Material Test Equipment

no data

Salt Spray Test Chamber

Description
The salt spray test chamber is used to test the salt spray resistance of materials or products under specific temperature & humidity within a certain time scope, it’s kind of common environmental testing chamber.

Program Controlled Safety Gauge Tester

The CHT99xx series programmable safety gauge tester includes CHT9910/CHT9912/CHT9922; Equipped with AC/DC voltage withstand test and insulation resistance test functions; It has 6 sets of testing modes and can achieve programmable testing. The AC and DC voltage output is 0.01kV~5kV/6kV, with an insulation resistance test range of 100k Ω~99G Ω. It also has arc detection and overvoltage detection functions. Optional RS485 interface allows for easy networking of experimental instruments through MODBUS communication protocol.

600W-1200W Programmable DC Electronic Load

Introduction
1. The HP8XXX series DC electronic load is a high-precision, programmable DC electronic load controlled by high-performance microprocessors
2. Adopt a 3.5-inch TFT true color LCD display with Chinese and English menus
3. With 4 basic working modes (CC/CV/CR/CW) and 10 functional modes
4. Equipped with comprehensive protection functions, including overheating protection, overcurrent protection, overvoltage protection, overvoltage
protection, and loop oscillation protection
Built in rich interfaces, including RS232, LAN, USB, and analog interfaces, for remote control and data collection and analysis

Multi-channel Resistance Scanning Module

The channel scanning module is a specialized built-in scanning module developed by Hepu Electronics in combination with the market's mass production and large-scale testing needs to complete multi-channel switching testing with our company's DC resistance tester, battery tester, and insulation resistance tester. The K series is a built-in scanning card, and the B series is an external scanning box, which is efficient and reliable, and is very suitable for automatic testing matching use. Hepu Electronics provides standard upper computer software to complete data collection for all channels.

Self-automatic Handheld Battery Internal Resistance Tester

CHT3554/ HP3554 battery tester adopts heavy current and strong anti-interference design, which can provide fast, complete, accurate internal resistance and voltage diagnosis for lead-acid batteries of the backup UPS system. No need to stop the operation of the device, we can measure online and quickly diagnose the deterioration of batteries to improve testing efficiency. The self-automatic data saving function can easily store testing data. The storage data capacity can reach 2,400 sets and can be upgraded to 4,800 sets.

Economical Conductive General DC resistance tester

HP3540 general DC resistance tester, the test range of 0.001MΩ ~ 31.000kΩ, the basic accuracy of 0.1%, combined with more economical cost performance, to measure various high, medium and low-value resistors; various switches and plug-in plugins Contact resistance, relay contact resistance, transformers, inductors and other winding resistances. Its temperature compensation function is widely used in fields such as coil DC resistance testing, and the meter resistance testing of cable copper rods.

SKZ-10000 Electric Ceramic Fireproof Fexural Tester

This tester is used to test the broken strength and rupture modulus of ceramic tiles, ceramic materials, fireproof materials etc.

TM-8 Glazed Abrasion-Resistant Ceramic Tile Abrasion Tester

This tester is mainly used for abrasion resistance test of glazed ceramic tile, it’s kind of common construction material testing equipment.

WM-10 Unglazed Ceramic Tile Deep Abrasion Tester

This abrasion tester is suitable for testing of unglazed ceramic tiles, mosaics etc, the abrasion wheel rotation number can be preset and automatic controlled.

Ceramic Tile Comprehensive Tester with 3 Supporting Pin

This ceramic tile comprehensive tester is widely used for inspect the appearance compliance of different tiles, it can inspect the edge straightness, squareness, smoothness.

BGD 528 Multifunction Abrasion Scrub Tester with Scrub Resistance

BGD 528 Multifunction Abrasion Scrub Tester is a powerful abrasion tester. By changing different abrasion heads, it can conform all testing standards for linear reciprocating abrasion, including wet abrasion scrub, sponge washability, scrub resistance, cleanability, dirt pickup resistance, MEK test, Rub test etc.
Moreover, this machine use touch screen to operate, user can set all required test parameters directly through touch screen, and also can check its working status at any time. Very easy and convenient to operate it.

QBY-2 Pendulum Paint Film Hardness Tester

The QBY-II pendulum type paint film hardness tester is a modification of the QBY pendulum type hardness tester. Its main characteristics are manifested in the improvement of horizontal mechanisms; The scale can move horizontally for easy zero adjustment; In addition, equipped with a photoelectric counter, it is fast, accurate, and labor-saving.
The design basis followed by this instrument is still GB/T1730-2007. Therefore, it is suitable for sampling tests of paints, varnishes, and related products to determine the film hardness of paints, varnishes, and related products.