Model: ZS-CXJ-Y-200
The Lab sheet former adopting rapid Kothen or Tappi method to make paper or thin sheet with different type of fibers in laboratory, the fiber type including Plant fiber, animal fiber, inorganic fiber, chemical fiber, synthetic fiber etc.

The laboratory rotary pulp digester` is designed to simulate the working principle of steam balls in production. The pot moves in a circular motion to fully mix the pulp. It is suitable for acid or alkali cooking of various fiber raw materials in paper laboratories. According to different process requirements, expected plant pulp can be obtained, providing a basis for formulating cooking processes in the production process. It can also be used for cooking other materials, especially in the fields of biomedicine, food processing, and other fields. In addition, the digester can also be used to provide hot steam for other laboratory equipment.

The Pulp beating degree tester (also known as pulp beating degree meter, beating degree meter, beating meter, tapping degree measuring instrument, tapping degree meter, tapping meter) is a special instrument for measuring the drainage performance of pulp. The product is designed according to the Schuber-Rigler method and is used to detect the water filtration capacity of the diluted pulp suspension, that is, the determination of the degree of beating. Its main technical indicators and performance parameters comply with the relevant provisions of national standards.

Manual supercharger is an experimental equipment used to shape pulp. In the laboratory, various fibers such as plants and minerals are steamed, pulped, and screened before the pulp is standardized and thinned. It is then placed in a sheet material cylinder, stirred, and quickly filtered to form a shape. Then, it is pressed and vacuum dried on the machine to form a circular paper sheet with a diameter of 200mm, which can be used as a paper sample for further physical testing.

The Valley Beater is an international standard equipment for papermaking laboratories. It is an indispensable equipment for studying the pulping and papermaking process.

The machine uses the mechanical force generated by the flying knife roller and the bedknife to process various fiber slurries. Cutting, crushing, kneading, splitting, wetting and swelling and fiber thinning, and at the same time, the fiber produces cell wall displacement and deformation, and the rupture of the primary wall and the outer layer of the primary wall. According to the pressure on the bedknife and the time of beating, the changes of pulp with different beating degrees can be obtained. The Wali beating machine is widely used in the beating test of various plant fibers, synthetic fibers, carbon fibers, and glass fibers. It is a papermaking production test, Indispensable papermaking experimental equipment for quality control, process development, teaching and research experiments.

Introduction
The Cobb tester is used to measure the water absorption performance of paper and paperboard surface, also known as paper surface absorption gravimetric tester. This instrument adopts the Cobb test method, so it is also called the Cobb absorbency tester.

This instrument is designed according to the basic parameters and requirements specified in ISO535 paper and paperboard---Water absorption measurement (Cobb method), GB/T1540-2002 paper and paperboard water absorption measurement method (Cobb method).

Paper printing surface strength tester
The paper printing surface strength tester is a special instrument used to detect the surface strength of coated paper and non-coated paper. It is a very important physical index reflecting the adaptability of paper printing, and it is a conventional instrument in the printing industry.

This instrument uses high-precision vacuum sensors to measure the vacuum degree of the vacuum container, replacing the mercury pressure gauge. Therefore, this instrument is a mercury free smoothness meter; Using imported vacuum mercury to extract vacuum from the vacuum container, the required vacuum degree can be achieved in an extremely short time, and is controlled by a microcontroller; It also has powerful data processing capabilities.

The high consistency disc refiner is the most basic instrument used in the experimental and research fields of the pulp and paper industry. It can make wood chips into pulp, improve the pulp, or make wood chips into synthetic fibers, glass fibers, and carbon fibers. In many fields, using a high consistency disc refiner can easily convert wood chips into fibers and various types of fine fibers. This machine is not only an ideal experimental equipment for the pulp and paper industry, it is also widely used as grinding experimental equipment or production equipment in industries such as metallurgy, building materials, plastics, and food.

The Canadian Standard Freeness (CSF) Tester is used to determine the rate of drainage of a dilute pulp suspension and express it in terms of freeness.

The laboratory rotary pulp digester` is designed to simulate the working principle of steam balls in real production. It is suitable for acid or alkali cooking of various fiber raw materials in paper laboratories. It can also be used for cooking other materials, especially in the fields of biomedicine, food processing, and other fields. In addition, the digester can also be used to provide hot steam for other laboratory equipment.