Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.

DRE-2D Thermal Conductivity Tester (transient probe method, large probe)

The DRE-2D thermal conductivity tester adopts the transient probe method and is suitable for measuring the thermal conductivity of materials such as highly viscous fluids, liquids, gels, particles, powders, etc. This instrument combines the hot wire method with the probe method, greatly improving the portability of operation while ensuring measurement accuracy. Users only need to insert the detector into the tested sample, and the thermal conductivity of the tested sample can be obtained through simple software clicks, making it particularly suitable for on-site measurement

Inquiry

Write a Review

Main features:

1. Convenient operation, fast testing speed, and accurate measurement,

2. Especially suitable for on-site measurement,

3. There are no special shape requirements for the sample,

4. Automated testing software, easy to operate,

5. The sample temperature controller can be used to test the thermal conductivity of the sample at different temperatures.

Main technical indicators

1. Thermal resistance coefficient range: 20-1000 (k * cm/w);

2. Thermal conductivity range: 0.1-5 (w/m * k);

3. Measurement accuracy:<5%;

4. Measurement temperature range: conventional detection is at room temperature, and the temperature resistance range of the testing probe is -40 to 120 degrees;

5. Probe size: φ 10 * 1500 (mm); Insertion depth: 600-1500 (mm);

6. Measurement time: 20 minutes;

7. Computer fully automated testing, data processing, and generation of detection reports that can be printed out;

8. Power supply: voltage 220V; Frequency 50Hz; Power<500W.

Configuration

1 DRE-2D testing host, 1 testing probe, 1 set of testing software, 1 set of communication interface and data cable, and 1 Lenovo desktop computer (configured according to the contract).