Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.

DRL-2B Thermal Conductivity Tester (Heat Flow Method)

This instrument mainly tests the thermal resistance of thin thermal conductors, solid electrical insulation materials, thermal conductive resins, beryllium oxide ceramics, alumina ceramics and other small materials, as well as the contact thermal resistance at solid interfaces and the thermal conductivity of materials. The testing material is in solid flake form, and adding a frame can detect powder and paste materials.

Standard:

MIL-I-49456A (insulation sheet, thermal conductive resin, thermal conductive glass fiber reinforced);

GB 5598-85 (Determination of thermal conductivity of beryllium oxide ceramics)

Inquiry

Write a Review

Main parameters

1. Sample size: ≤ Φ 30mm

2. Sample thickness: 0.02-20mm

3. Hot pole temperature range: 100-500 ℃

4. Thermal conductivity testing range: 0.05-20 W/m * k

5. Thermal resistance test range: 0.05-0.0001m2 * K/W

6. Pressure range: 0-1000N

7. Displacement range: 0-30.00mm

8. Testing accuracy: better than 5%

9. Experimental method: a. Homogeneous material testing. b. Composite material testing.

10. Computer (Windows XP, Win7 systems) fully automated testing.

Configuration: Includes one DRL-2B testing host, one set of software, one set of communication interface and data cable, and one desktop computer (configured according to the contract).