Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Electromagnetic Vibratory Sieve Shaker vibrating sieve analyzer screen separator
Product Introduction:
The electromagnetic vibrating sieve is suitable for the screening and classification of powder particles in the laboratory. The equipment complies with a number of national standards, is equipped with automatic weighing, calculation and analysis software, and can generate particle size distribution curves. Supports a wide range of screen configurations, up to 6 kg sample load, and features both batch and continuous sieving modes. Its intuitive user interface and efficient performance help increase laboratory productivity. It is widely used in a wide range of fields, including pharmaceutical, chemical, education and scientific research, etc.
The particles in the sieve are thrown up and screened again, which will vibrate at a frequency of 3000-6000 times/minute, so that the sieved sample can be uniformly distributed throughout the screen for reciprocating three-dimensional throwing motion. The electromagnetic vibrating sieve has the characteristics of high efficiency, high load and high separation accuracy. The sieve is equipped with software free of charge, which can be connected to the computer and balance, and can automatically weigh and calculate the entire screening experimental process. Automatic analysis and evaluation of the screening results of all levels of sieve layers. And the particle size distribution of each sieve layer can be generated into a particle size distribution curve, which can be referenced with the analysis results of the laser particle size analyzer, and the sieving experimental results can be saved and exported indefinitely.
Features:
1. Conform to the national standard GN/T6003.1-1997, GB/T6003.2-1997 standard, and comply with the provisions of Ph.Eur.2.9.38 of the European Pharmacopoeia
2. Each group of standard sieves has an inspection certificate, and the sieve holes are monitored with standard testing instruments
3. Equipped with free sieve analysis software, the whole process of sieving can be automatically weighed, calculated, analyzed, and evaluated
4. The software can generate the particle size distribution curve of each level of sieve layer
5. The test results can be exported or electronically saved
6. With electromagnetic drive as the sieving power, the three-dimensional throwing sieving motion mode is realized, so that the sample is more evenly distributed on the surface of the screen, and the pass rate and sieving accuracy of the sample are improved.
7. Duplex disc cover design, can quickly replace the standard sieve
8. There are two ways of continuous and intermittent sieving to cope with the sieving experiments of different samples
9. The visible transparent top cover and visible transparent spacer can observe the positive screening process
10.The 8-inch color touch screen is easy to operate, and the screening data is clear at a glance
11. The storage, printing and saving of the two paths can be on the host computer or on the computer
12. Comparable and reproducible screening results can be carried out in the industry
13. It can reduce the labor intensity of laboratory operators and improve work efficiency
Product Parameters(1):
1. Measuring range dry method: 20 microns to 25 mm,
2. It can be equipped with standard screens of different materials with diameter: 203mm or less.
3. Sieve tower level: 5cm high standard screen can be equipped with 12 grades, 2.5cm high standard screen can be equipped with 24 grades.
4. Screen configuration: can be equipped with many types of screen options, including (diameter/height)
5. Maximum sample load: 6 kg
6. Sieve tower height: about 560mm
7. Instrument size: 520*350*200mm
8. Weight: 30kg
9. Vibration frequency: 3000 to 6000 times/min
10. Power supply: 220V/110V 350W 50Hz/60Hz
11. Control mode: touch screen control
12. Screening setting: intermittent, continuous, timed.
13. Software configuration: It can automatically analyze the sieving allowance at all levels, the cumulative sieving surplus, the grading sieving surplus, the pass rate, the cumulative pass rate, the percentage of the loss rate, and automatically generate the particle size distribution curve.
Product Parameters(2):
1. Power supply: 220v50HZ
2. Weight: 18kg
3. Size: 30*54*26cm The door opening height is 80cm
4. Vibration speed: 3600 times/min
5. Highest sieve level: 6 standard sieves can be superimposed at the same time for simultaneous screening
6. Vertical tapping: Yes, intermittent tapping mode can be set
7. Particle size range: 5 microns-4.75mm
8. Adjustable frequency: 2HZ-300HZ
9. Time: 1-99.99 set as needed
10. Maximum sieving capacity: 10 grams
11. Minimum sieving weight: 0.1 grams
12. Standard sieve specification: 75
Application:
1.Sieving and grading of solid powder particles in the laboratory: raw material API, preparation granules, excipients, sand, flour, plant seeds, metal powders, fertilizers, plastic granules, minerals, laundry detergents, building materials, coffee, etc.
2.Laboratories and research institutes of colleges and universities.