Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Flammability Chamber
The flammability chamber are specially used to test the Flame retardant performance of various kinds of materials, such as textiles, construction materials, plastics etc., it's very test equipment for material properties study and new material research in nowadays.
no data
Suitable for wire and cable, rubber (plastic, artificial leather) insulation and sheath, and other polymer materials under the action of specified pressure and temperature, oxygen and compressed air in the medium for aging experiments.
This equipment is used to test the pH value and conductivity of gases generated from combustion in low halogen and halogen-free flame retardant cables or optical cables, so as to determine the properties of materials.
The NES 713 smoke toxicity test box meets the NES 713 standard and is used to test the combustion characteristics of materials. It can test the smoke toxicity index of a 100g sample after combustion.
The measurement of smoke density is an important method for evaluating the combustion characteristics of cables or optical cables
Face, it is related to the evacuation of personnel and the determination of whether to approach for firefighting. This instrument is mainly used to measure the smoke concentration released by cables and optical cables during combustion under specific conditions. Under flame or flameless combustion conditions, transmittance is used as a judgment method to compare different cables or optical cables under specific conditions.
Face, it is related to the evacuation of personnel and the determination of whether to approach for firefighting. This instrument is mainly used to measure the smoke concentration released by cables and optical cables during combustion under specific conditions. Under flame or flameless combustion conditions, transmittance is used as a judgment method to compare different cables or optical cables under specific conditions.
This machine can perform horizontal and vertical flammability tests on the plastic components of equipment and appliances, and is equipped with a gas flow meter to adjust the flame size. It is driven by an electric motor, and the operation is simple and safe. It can evaluate the flammability of materials or foamed plastics, such as V-0, V-1, V-2, HB, grade.
This flame test chamber is used to test the combustion performance of plastics by horizontal method (linear burning speed) or vertical method (flame and non-flame burning time).
This testing machine is used to test the fire resistance of a single wire or cable during a vertical combustion test. It is not suitable for testing small specification single wire and cable with a total cross-sectional area of less than 0.5mm2, as its conductor will be melted before the end of the test, nor is it suitable for thin optical cables because the cable will break before the end of the test.
This Flammability Chamber is used to test the ignitability of construction materials under specified conditions, mainly used for test of extruded sheet, moulding sheet, polystyrene board, polyurethane, phenolic aldehyde board.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person:
Mr. Patrick.Chuang
info@servereal.com
WhatsApp/wechat: +86-18014755745