Fully Automatic Flat Plate Thermal Conductivity Tester (protective hot plate method)

Main technical performance

1. Thermal conductivity range: 0.0010~3.0000w/m · k, displayed to four decimal places;

2. Test accuracy: ≤ ± 3%; Repeatability: ≤ ± 1%;

3. Hot surface temperature range: room temperature~95 ℃, resolution 0.01 ℃.

4. Cold noodle temperature range: 0-60 ℃, resolution 0.01 ℃, controlled by a constant temperature water tank (standard specifications).

Note: Low temperature testing can also be selected according to customer requirements, such as -20 ℃~60 ℃, -30 ℃~60 ℃, -40 ℃~60 ℃ and other specifications, and the cost will be calculated separately.

5. Power supply: 220V/50HZ; Power ≤ 2KW.

6. Calorimetric power supply: voltage 0-30V, resolution 0.0001V; Current 0-3A, resolution 0.0001A.

7. Connect the computer for automatic testing, data processing, and generate detection reports to achieve data printing and output.

8. Sample size requirements:

DRH-III 200 × two hundred × (5-20) (mm);

DRH-300, DRH-ZD-300 300 × three hundred × (10-50) (mm);

DRH-400, DRH-ZD-400 400 × four hundred × (10-80) (mm);

DRH-600, DRH-ZD-600 600 × six hundred × (10-100) (mm);

Introduction to Instrument Devices

The instrument consists of a high-precision stabilized power supply, a temperature measuring instrument, a central heating plate heater, a heat protection plate heater, a constant temperature water tank, and a computer testing system.

1. Test head section: calorimeter plate, heat shield plate, and cold plate.

2. Heating system: temperature protection plate heater and metering power heater.

3. Cold plate temperature control: Constant temperature water tank.

4. Temperature measurement system: using high-precision digital instruments to ensure its accuracy and stability, and achieving internal zero point compensation.

5. The power measurement adopts a high-precision stabilized power supply for heating, with an accuracy better than 0.1%.

6. Computer testing components: computers, communication components, and testing software

The DRH-ZD series specifications come with automatic pressurization and thickness measurement functions, which can detect the thermal conductivity and resistance under different pressure states. It is very suitable for materials with compressibility:

a. Using high-precision displacement sensors and connected to a computer for automatic thickness measurement, with a measurement range of 0-50mm and a resolution of 0.01mm;

b. It can automatically pressurize and detect the thermal conductivity under different pressure states. The pressurization range is adjustable from 0 to 1000N, with a resolution of 0.1N.

Configuration: Includes one DRH-ZD-300 testing host, one set of software, one high-precision constant temperature water tank, and one branded desktop computer (configured according to the contract).