Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Material Test Equipment
no data
Test object: Lithium battery cells (size can be customized);
Test indicators: battery temperature, voltage, gas production, gas production rate, starting temperature of thermal runaway, etc.
Test indicators: battery temperature, voltage, gas production, gas production rate, starting temperature of thermal runaway, etc.
The cone calorimeter is a material combustion performance testing instrument based on the principle of oxygen consumption. After more than 30 years of continuous improvement and perfection, the cone calorimeter has become one of the most important experimental instruments for studying material combustion performance.
Cone calorimeter testing is a safe, fast, and accurate detection method. In addition to product development, cone calorimeters can also be used as quality control tools.
Cone calorimeter testing is a safe, fast, and accurate detection method. In addition to product development, cone calorimeters can also be used as quality control tools.
Test object: refrigerant or combustible gas Test indicators: combustion speed, flame peak area, flame bottom cross-sectional area
The insulation glove flame resistance test device is suitable for testing the flame resistance performance of insulation gloves for live working. Meet GB/T17622-2008 and EN 60903.
The thermal radiation flame propagation tester is developed based on the French building materials and railway vehicle flame retardant testing standard NF P92-501.
The thermal radiation droplet tester is developed according to NF P92-505 and EU 95/28/EC fire retardant testing standard.An upper radiation heat source is applied to the sample for 30KW/m2 thermal radiation, which may cause combustion of released gas, and then observe whether the sample will produce droplets and cause combustion of fiber cotton.
This flame retardant performance tester is suitable for various textile products, medical protective clothing, curtain decorative fabrics, tent fabrics, etc. (specific ignition nozzles and sample racks can be customized to meet various standards).
Hot Deformation Vicat Softening Point Tester is mainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials. This instrument is easy to operate and has precise control, and is widely used in colleges, research institutions, and product quality supervision and inspection units.
This combustion tester is suitable for testing the flame retardant performance of public place used fabrics, places such as hanging curtains, outdoor fabric etc. It is applied to fabrics with a weight greater than 700 g/m2 (21 oz/yd2). Meets NFPA 701 standard.
The notched prototype is a standard notched spline used for impact testing of non-metallic materials such as plastic and organic glass using mechanical processing methods.
This instrument is designed and manufactured according to the industry standard SH/T0308, and is used to measure petroleum products such as fire-resistant fuel, hydraulic oil, turbine oil, or other air release values. It consists of a heat-resistant jacket test tube, a circulating water bath, an air heating bath, gas pressure control, and gas time control parts.
no data
Profesional manufacturer & supplier for test equipment & analytical instruments since 2003.
Contact Us
Add: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact Person:
Mr. Patrick.Chuang
info@servereal.com
WhatsApp/wechat: +86-18014755745